Directions for using The Natural Solution for Hot Tubs.
The Natural Solution
For Hot Tubs
DO NOT DRAIN YOUR HOT TUB
DO NOT USE HOT TUB DURING CLEANSING PROCESS
Cleansing Your Hot Tub Filter Cleaner / Hot Tub Cleanser
The Filter Cleaner/Hot Tub Cleanser has a dual purpose. It cleans your filters and cleanses your hot tub. Cleansing your hot tub is highly recommended for new and used tubs prior to starting our system. It removes buildup in the plumbing system and residues from the manufacturers. We want to use your water in your tub, so do not drain the tub. If tub is empty you will have to fill, cleanse and drain tub before starting. The cost to fill a hot tub is under $12.00 for an 8 man tub. Well worth it!!
Day 1 & 2
Turn down the temperature of hot tub to its lowest setting.
This product works best in cooler water. Put your oldest filter in the tub as it will collect the residues.
Clean filters later with Filter Cleaner (see cleaning your filter notes).
Shake the cleanser leave 1 oz. in the bottle to clean the filters later and pour bottle in tub. Run the jets for 5 min. Let tub circulate on normal cycle for 2 days (No problem if longer), 2 or 3 times per day turn the jets on high for 5-10 minutes keeping the cover open each time (set a timer). Foaming will occur, do not be alarmed. If there is too much foam turn the jets off to allow it to dissipate. The cleanser removes the buildup of chemical residues & oils in your plumbing and jets.
Repeat this process every 4 years.
On the years that you do not cleanse your tub refer to Day 3 to open your tub each year.
Day 3
Shut off power, drain and clean the hot tub. Remove the filter(s) left in tub & rinse thoroughly and then soak in Filter Cleaner. “IMPORTANT” Hold the garden hose up to each jet starting with the top jets. This runs water back thru the jets to flush out the jet lines to remove any debris & cleanser to avoid foaming later on. Ensure all of the old water is out of the lines. Flush all jets 3 times or more. In pail Dilute javex or vinegar in water to wash entire tub, filter housing, head rests, cover and rinse.
All water must be removed from tub & wiped dry. Your hot tub is clean & ready to be filled.
Preparing your garden hose
using a clean garden hose eliminates problems associated with water mold. Water mold is white flakes that dissolve when touched and is caused by a contaminated garden hose. Call to learn how to remove the mold. To prevent water mold, pour 4 cups bleach or vinegar into the garden hose to clean it. Next, attach the hose to the faucet and flush it thoroughly with water.
Do this prior to a fresh fill. This is completely different from flakes caused by calcium or mineral build up.
Fill your tub with Spa Pre-Filter
Spa Prefilter Filters 28,000 liters
The filter is designed to remove most of the elements, minerals and impurities, giving you cleaner softer water. Attach the Spa Prefilter to garden hose and flush for 30 seconds & fill the hot tub, use it to top up water. If the flow is restricted, it is full of elements and minerals. It is now time to replace the Spa Pre-filter.
If you need to add stain and scale, add it when filling your tub.
Cleaning Your Filters
Rinse the filter weekly Deep clean the filter monthly
Rinse the filter thoroughly then pour 2 – ½ oz. pre-measured filter cleaner into a pail. Next, add the filter and fill the pail with cold water. Soak the filter for 24 hours then remove the filter and rinse it. It is beneficial to have 2 sets of filters so you can rotate them.
Adding 3 Month Hot Tub Water Treatment
-
Heat the water, when temperatures are above 90 degrees, test the alkalinity & PH using test strips.
-
Alkalinity must be in range 80-120. If it’s too low add Alkalinity increaser. If too high add PH down.
-
Wait 5 hours to retest the alkalinity and repeat if necessary.(Do not add more than 3 applications of ph in 1day)
-
Work on Alkalinity first then PH.
The PH must be in the range of 7.8 - 8.2 adjust accordingly
-
If numbers are in range shake and add 1 full bottle of 3 month water treatment.
Use ½ the bottle for 2-4 man tub under 800 liters of water. Circulate water for 30 minutes and enjoy The 3 month water treatment may take up to 5 days to stabilize in the water. If you experience cloudy water, retest and adjust your PH & alkalinity and 1 hour later add 1-2 tbsp of chlorine.
If you have questions call me, I am here to support you. Send a photo of your test strip for clarification.
If you experience foam / scum line / cloudy water / odour there may be excessive amounts of contaminates in the water due to lotions, oils etc. To clear up your water quickly rinse your filters and add 2 tablespoons of Chlorine Granules. Your water will clear up, you do not have to drain the tub.
Repeat if necessary. Please check your Ph. & Alkalinity to ensure they are in range, if out of range adjust.
Filter Flosser
Attach to garden hose to rinse filters.
A clean filter ensures better water quality.
Maintenance
Adding 1-2 tbsp. of chlorine once per week and rinsing filters is part of a weekly maintenance routine.
However, you determine how much chlorine your tub requires. You should always have a 0 reading of chlorine on your test strip as the enzymes are now working to keep your tub cleaned.
Every 3 months add another bottle of 3 month water treatment.
The Natural Solution is compatible with ozonators and UV lights
We recommend using Chlorine as a shock.
(We DO NOT recommend bromine)
***Health Canada recommends 3 ppm chlorine or bromine***
Should you experience problems with your water or have questions please contact me.
I offer a 100% GUARANTEE but only if you call so we can resolve any concerns.
Manitoba Distributor donna@thenaturalsolution.ca
Donna Ladan mb.thenaturalsolution.ca
204-795-1212
Facebook: The Natural Solution MB LIKE US!
Helpful Tips for using the 3 month Hot Tub Water Treatment.
1. Fragrances... are usually used to mask chemical odors, and a lot of these have chemicals in them as well. The over use of fragrances may cause foaming and/or cloudy water. If this happens shock with 1 tablespoon of 99% DiChlor and clean your filters.
2. If you ever experience a stale or an organic odor coming from your spa water, this simply means The Natural Solution has found contaminants and is working harder. Sometimes this odor might be coming from the cover or headrests, wipe these down with a diluted bleach solution and an old rag. If this doesn't solve the problem shock the water with 2 tablespoons of 99% DiChlor. If the problem persists, it might need a stronger shock, use another tablespoon or so of the shock and that should take care of it. Just allow sufficient time for the shock to burn off before getting back into the tub.
3. The Natural Solution is compatible with ozonators, chlorine and bromine. We highly recommend using only 99% DiChlor as a shock. I Don't recommend bromine. Bromine does not burn out 100% and will leave a chemical residue in your hot tub. *Health Canada recommends 3 ppm chlorine or bromine.
4. Cloudy water may be caused by a large number of bathers, lotions, oils, deodorants, sunscreens or other products used on the skin or soap residues in bathing suits. If you get cloudy water hose your filters off really well with the Filter Flosser, if this doesn't take care of it shock with 2 tablespoons of the 99% DiChlor. Be patient. The spa water will clear up and does not have to be drained if the water is cloudy; The Natural Solution just needs some time to do its job.
5. If your spa water has a high metal content and/or if your water source is from a well we highly recommend the use of a Carbon Block Pre-Filter. The pre-filter will filter out most of the metals from the water. If you still have high metal you can use a “Metal B Gone” or a “Stain and Scale” product from you local hot tub store.
6. Rinse your filters at least once a week with the Filter Flosser. The filter is the most important part of your hot tub. Clean your filters at least once a month with the All Natural Filter Cleaner. I highly recommend getting an extra set of filters so you can use the rotation method of cleaning your filters. This way you will always have a clean filter available when you need to clean the one in the hot tub. Just pull the dirty filter out of the hot tub, hose off thoroughly with the Filter Flosser, and soak it in a bucket of cold water and 1oz of the All Natural Filter Cleaner. Put your clean filter in the hot tub. When the dirty filter is done soaking, pull it out and hose it off really well, then put it on the shelf to dry, it will be ready for the next time you need to change them out. This method makes cleaning your filters much easier.
7. Foam is almost always a result of soap left in bathing suits. I recommend that you designate a set of swimsuits just for the hot tub. When you get out of the tub, just hang them to dry. The Natural Solution will not ruin swimsuits. To get rid of the foam you can use a defoamer product from the hot tub store, but usually all you need to do is skim it off and rinse your filters a couple times. Don't use soap on your skin when bathing before entering your spa. This will introduce phosphates to your water and will cause foaming as well.
If you have any questions or problems, please do not hesitate to give me a call.
Donna Ladan 204-795-1212
Email---donna@thenaturalsolution.ca Website-- www.mb.thenaturalsolution.ca
“Like us on Facebook at The Natural Solution.mb”
|